Using Atom 2 with SB Watch

Control your SB Watch directly from Atom 2 without needing a phone. Set time predictions instantly using the built-in Atom Time app.

What is Atom 2?

Atom 2 is a smart remote control that connects to various Electricks devices via Bluetooth. When paired with SB Watch, it becomes a standalone controller for setting time predictions.

Learn more about Atom 2

Why Use Atom 2 with SB Watch?

No phone needed โ€” Set predictions without pulling out your phone

Instant control โ€” Faster than using the TimeSmith app

Standalone performances โ€” Perfect for walk-around magic where you want minimal setup

Discreet โ€” Small remote easily hidden in pocket or hand

How It Works

Atom 2 connects directly to your SB Watch via Bluetooth using the Atom Time built-in app. You can set specific times or use quick preset buttons.

Connecting Atom 2 to SB Watch

  1. Turn on Atom 2 โ€” Press and hold the power button

  2. Open Atom Time app โ€” Navigate to the Atom Time mini-app on Atom 2

  3. Pair with SB Watch โ€” Follow the on-screen instructions to connect via Bluetooth

  4. Watch confirms connection โ€” SB Watch hands will move to confirm pairing

Note: SB Watch can only connect to one device at a time. Disconnect from TimeSmith app or other devices before connecting Atom 2.

Using Atom Time

The Atom Time app on Atom 2 provides several ways to set the time on your SB Watch:

Numeric input โ€” Enter a specific time using the keypad

Quick presets โ€” Use pre-programmed time buttons for common predictions

Increment/decrement โ€” Adjust hours and minutes with arrow buttons

Reset โ€” Return hands to current time

For detailed Atom Time instructions, see Atom Time documentation.

Standalone Mode

When using Atom 2 with SB Watch, youโ€™re operating in standalone mode โ€” the watch works independently without the TimeSmith app.

This is perfect for:

  • Walk-around performances
  • Minimalist setups
  • Situations where you donโ€™t want your phone involved

See Standalone Mode documentation for more details.

Tips

Practice the controls โ€” Familiarize yourself with Atom 2โ€™s button layout before performing

Pre-set favorites โ€” Configure quick preset buttons for your most-used times

Keep charged โ€” Charge Atom 2 regularly to ensure itโ€™s ready when you need it

Test connection โ€” Always test the Atom 2 โ†’ SB Watch connection before performing

Troubleshooting

Atom 2 wonโ€™t connect:

  • Make sure SB Watch isnโ€™t connected to TimeSmith app or another device
  • Restart both Atom 2 and SB Watch
  • Check that both devices are charged

Connection drops:

  • Stay within Bluetooth range (about 10 meters / 33 feet)
  • Replace Atom 2 battery if low
  • Replace SB Watch battery if needed (CR2032, every 6 months)

Hands donโ€™t move to correct position:

  • Calibrate SB Watch in TimeSmith app
  • Reconnect Atom 2 to refresh the connection

For more help, see SB Watch Troubleshooting or Atom 2 Troubleshooting.