Atom Time

  • Originally designed to set the time on compatible watches .

  • Also supports revealing a drawn clock on Teleport or showing a pocket watch image as a prediction.

Choose the output format within the mini-app before triggering.

How it Works

  • Install the Preview firmware (v2.4.1) to Atom in the MagiScript editor

  • Make sure that Atom and Teleport are charged

  • To launch the app, turn on Atom and press button #1 (top-left) in 5 seconds (while the LED is cyan). It will connect to Teleport automatically.

  • If you use it for the first time you need to change some settings in the PeekSmith App or in the MagiScript editor.

  • In the PeekSmith App go to the Settings than connect to Atom under the CONNECT DEVICES tab, if you connected press Details than press Device Settings scroll down to ATOM TIME

  • Open the MagiScript editor and connect your Atom. Press Atom Settings than go to Mini-Apps. Follow the Editor Basics guide if you need more details.

 

Send to Teleport

  • Off – It won’t send anything to Teleport

  • Pocket Watch Pic – It will send a picture to Teleport by a pocket watch(It can only send a picture of 30 minutes only times like 00;30)

  • Hand Drawn Clock – It will send a picture to Teleport by a Hand Drawn Clock

Enter Time

  • Now you can type a time . To set 5:00, press 5. By default, Atom will set the time after 3 seconds , but you can press the bottom-left “submit” button (#10) to send it immediately. To set 7:14, type 7, 1, 4.

  • If you need to correct the time  you entered use the bottom right (#12) button for deleting the last digit.

  • You can also reset the time  to the actual time. Enter 4444 or 9999, or long-press any of the buttons.

 

▶
0:00 / 0:00

▶
0:00 / 0:00